Guide2 min read

220V or 380V? Choosing the Voltage for an Electric Chain Hoist

220V suits workshops without a three-phase supply; 380V suits industrial sites and higher capacities. Compare the two ranges and how to choose.

Product selectionVoltage
220V or 380V? Choosing the Voltage for an Electric Chain Hoist

After capacity, the next question when choosing an electric chain hoist is the electrical supply it will be connected to. The LiftHand range includes both single-phase 220V and three-phase 380V chain hoists. The right choice depends on your existing installation, the load and how intensively the hoist will be used.

Short answer

  • If there is no three-phase (380V) supply and the load is not very heavy, consider a 220V chain hoist.
  • If three-phase power is available, the load is heavy, or the hoist will run in intensive industrial use, consider a 380V chain hoist.

When does 220V make sense?

Installing a three-phase supply means extra cost and time for some businesses. 220V chain hoists can be installed in workshops, small businesses and service areas with a single-phase supply. LiftHand 220V chain hoists come in both fixed-suspension and monorail (travelling along a beam) versions, with compact models for lighter work.

When is 380V required?

For heavy loads and intensive use, consider the 380V range. It suits factories, production lines, warehouses and applications with frequent lifts throughout the day. Low-headroom models for buildings with low ceilings are also part of this range.

Have the electrical supply checked

Higher motor power means higher current draw, which matters especially on single-phase 220V lines. Whatever the voltage, cable cross-section and fuse capacity should be checked by an electrician. Motor power and supply values are listed in each product’s datasheet.

Selection checklist

  • Is a three-phase (380V) supply available at the site?
  • What is the heaviest load in tons?
  • How often and how long will the hoist run each day?
  • Is a fixed suspension enough, or is travel along a beam (monorail) needed?

Compare the 220V chain hoists, 380V fixed-suspension and 380V monorail ranges. If you are unsure about your installation, request a quote with your site details.

Teklif ister misiniz? WhatsApp'tan yazın.